Bought anything for your car lately Veeky Forums? what are you waiting on?

The whole thing. Waiting for new plates.

>day or two

fast ratchet set and a good breaker bar it's 30 minutes a corner

New rotors and calipers just came in today
1/2

2/2

Here's one with the caliper

Nice, I want a big brake kit for my car, but I want to do all 4 wheels at the same time and that's a fucking crapload of money.

Those grit guards are far better than the new cyclone dirt traps, which don't do shit except prevent dirt from getting to the bottom of the bucket.

Speaking of Chemical Guys, picked up Pete's '53 wax. Can't wait to try it.

Pacemaker competition headers. Look sexy as fuck. Also bought an X force high flow cat

EL Fairmont

6 lug, what kind of truck do you have?

Mine has drums rear so I'm only upgrading the front set

It's an '03 Tacoma, but the brakes are for a Tundra of the same year.

The brakes are almost the same size but with stronger calipers and thicker rotors for better heat-sink. Should be a fun retrofit project

Nothing yet. just an oil change this year and its all good.

About to buy some b6/b8 bilsteins and new mounts for my german junk. Just got done with total rear end refresh of bushings. I wish the damn thing was faster.

>Still waiting for my single piston FC brake pads from Racing Beat. The guy said that UPS would email me but they still haven't and that was 3 days ago.

>1981 Celica Supra rear brake pads.

>OEM quarter window clips

waiting on some struts and shocks for my truck and the dd, Monroe has a good rebate right now
>mfw replacing b4 bilsteins with monroes

Hard dog roll bar
Voodoo shift knob
Shorty antenna
:-)

Just bought new wheels... Costs an arm, I paid them off as soon as I bought them, but I still feel like I'm playing catch-up with my finances when I know that I'm not.

Feels great to have them though!

Had an upholstery joint do some work on my stock 350Z seats. Upgraded to some Corvette Red leather to match the rest of the interior. Was pricey but looks dope. Was my preference against being too ricey and getting aftermarket buckets. Plus I get to keep the heated/electric seats.

Bought some masking tape, flap discs and other stuff, getting ready to attempt a final solution to my rust problem before selling it, so it atleast will look nice and perhaps last a good year before the oxidijewsation starts poking through again

OEM LED tail lights
Used off ebay, $180 for the pair

Way brighter than stock. Much nicer and not too ricey

I bought a new rear brake light switch for my bike.

>looks dope
Sorry dude but it looks awful. Especially the steering wheel.

in the last month: bridgestone re760's, coilovers, full set of polyurethane bushings for control arms and sway bars, rear rotors, rear pads, oil, oil filter

That's just gross.

steering wheel cover is stock. just worn

I think this looks pretty sick

God, the 350Z interior is just as shapeless as the exterior.

>350z
>shit taste
checks out

That shitty sewn on vinyl cover is not stock.

No, but I'm about to buy a car.

I'm debating between a Lexus ES350 or Mercedes E350. I can't really fucking decide.

Or I can save my money, buy a Camry and use the rest of the money on guns.

>I think it looks sick

>Power steering pump on Durango goes bad.
>Ok, time 2 fix.
>Remove belt, belt needs replacing, fine.
>Huh, idler puller is also shit, better get that too.
>huh, valve overs are leaking, better get those while I'm in here.
>Fuck, two of the bolts are rusted and snapped.
>Need to remove crankcase hose for clearance. Fittings are plastic and goes directly into head, come apart in hands. Fuck.
>Driver's side valve cover requires removal of fucking brake booster.
>Fuck this truck.
>That feel when wasting my weekends on fixing this thing instead of just taking in a car payment makes sense because I have no friends.

>Using anime to spread opinion

Your cancer is contagious

Good on you for being original and not taking shortcuts with aftermarket seats.

shapeless? explain.

>Because I can

the red/greenishbeige-gray combination looks a little weird, personally i would've gone with black.

maybe its just the camera making it look weird.

should've gotten buckets, dude.

wtf i owned a w202 and had literally no rust apart from under one stone chip that i neglected for ages

I would have done black if not for the already stock beige trim. Was being cheap.

stick some alcantara on the steering wheel and your good to go.

The door card is more bland and boring than those old 80's Japanese trucks with just a vinyl-covered piece of cardboard for a door card. The dash is uninspired, the center stack is just a smooth bit of plastic up the middle. It's like you had an unimaginative 7 year old draw a car.

Ordered 500 EUR worth of parts from Netherlands to Canada. I can see on the tracking info that the address does not say my house number (sellers fault), everything else is there though. Now I get to silently freak out for 2 weeks wondering if it will fail to ship.

nice, i just did the same with my a4. the newer q5 suvs come with stock 4 piston fixed caliper brembos and bolt right up to the newer a4s. replacing my floating 1 piston stockers not only lets me use bigger 2-piece rotors, but also saved me about 18 lbs total, all unsprung mass, 7 of which was rotating from the rotors.

was having a big problem with brake fade at the track and braking from over 100mph but these babies fixed that right up. directional vanes too, so next up is installing some brake ducting with underbody naca inlets.

miata?

Clutch kit and a rear main seal.

Bought an AUX Input for my 2002 BMW 318i and waiting for it in the mail. Was getting sick of burning CDs, I need my spotify goddammit! Plus I asked a BMW Specialist how much it would cost to install the wire, they told it would be $97. I might just man up and try to put in myself.

buying a new waterpump and antifreeze for my car as soon as my new credit card arrives.