I took my GSXR to get inspected today and was asking the guy about valve adjustments. He said it's not needed for my bike (2002). Is there any truth to that? He said he was a suzuki factory mechanic for a long time
Dylan Clark
What milage is your bike? I've known plenty of gixer fags who never get theirs adjusted and are over 30k. A quick Google reveals similar anecdotes, and people saying they took theirs to be adjusted at the factory recommended 15k, only to not need any changes once they took the head off.
Here's my k8
Charles Morris
so is this the new thread?
Adrian Harris
...
Ian Baker
No its the one with the anime bike girl
Jordan Smith
Is this the real thread?
Nathan Russell
What headphones do you guys ride with? I have a pit of bluebuds x2s but they're too big to wear under my helmet, I'm looking for a pair of low profile wired earbuds (ideally with microphone and remote in-line) for ~$50. It'd be cool if they had foam ear tips so I can get the noise reduction at highway speeds without the total sound isolation of silicon tips.
Michael Cox
i put my dr dre's beats over my neck and angle them upwards, works a treat
Austin Clark
This one has the most replies lets go with this one
Jeremiah Bennett
if House M.D. rides a honda then honda obviously can not be a shit
Austin Cook
>mfw this guy is going full autist and making a million threads
Andrew Cooper
Are new /dbt/s a meme now?
Asher James
Let's flood the board
Dominic Butler
>wanted to post sem pictures >shitstorm is happening
of course.
Matthew Jackson
Holy fuck
Andrew Rogers
I would like to see these pictures. Save them for when this calms down though.
Tyler Wilson
reminder that honda a shit
Ayden Johnson
You don't take the head off to check your valves.
Gabriel Fisher
skully people took the money from their crowd funder and bought stupid shit like dodge vipers
Then you definitely don't need to check it yet, and probably won't need to for a while. You'll prolly sell or wreck the bike before it really needs valves adjusted.
Michael Rodriguez
i had a K9 if i remember right my manual said it needed to be checked at 20k miles
also you dont take the head off you take the valve cover off.
Cameron Morales
ayyy fucking lmao
Carter Watson
Posting some pics the shittiest bike you've ever seen for posteritys sake. I promised myself if this thing still ran when i pulled it out of the shed this spring i'd do a full rebuild. I think i'll stick with the ratbike aesthetic, but in a post-modern junkyard chic sort of way, not a rolling-pile-of-shit like it is now.
Nathaniel Harris
PUT A 4AGE IN IT
Camden Howard
Serves them so fucking right >especially considering my dumb ass father bought 2
Grayson Jackson
The owners manual says to have them adjusted at 15,000 miles so that was why I asked. The guy also said steel braided lines are partial memes and not really needed. Replacing the lines with just fresh standard lines accomplishes the same thing
Carter Miller
>buy one viper >crash >buy second viper >accountant complains >fire her El e el
Matthew Wood
Right, valve cover my bad. But the point remains you don't need them adjusted for a while despite the manual, and it's easy enough to check them yourself with some feeler gauges so there's no point taking it in at 15k JUST for the guy to charge you labor and tell you they didn't need adjustment, unless you literally cannot wrench at all or spending two hours on your bike isn't worth the money you'd make in that time.
Michael Collins
Check out muh sweet custom gas gas cap
That would be hilarious, but I'm probably going to try and fit a 250 in there. Its got a current dry weight of 186 lbs so it'll be proper stunty.
Blake Cruz
adjusted or checked?
as for steel braided lines all the factory race teams use them but i feel like an average rider wouldn't get any gain from having them or be able to notice a difference. but steel braided lines always come in a bunch of colors so if you are looking to do a little personalization then go for it.
Mason Flores
>tfw no bike >tfw no license >tfw no car >tfw no license
Matthew Hernandez
why are you on Veeky Forums?
Ethan Ross
"inspected and cleaned"
Jayden Morgan
Went riding with friends this sunday. Had fun and nothing broke. >heres a scen pic of my bike
Christian Wright
I super duper like automobiles
Blake Martinez
and my and custom adjustable seat arrangement
Camden Hill
I really want to know how you'd fit a 4age in a bike >carb 4age sound from a bike yes please also there are scooters that have more cc then you senpai
James Reyes
>riding all day with cross winds >all chicken strips on the right side are gone from riding straight >check /dbt/ >Veeky Forums is /dbt/ now
Owen Smith
I'm sexy and I know it.
>ride in Denmark doing 150 @ 130 with Big Yellow in tow >cop car speeds up to us @ 180 >gets beside us, matches speed >nothing to lose so give the guy riding shotgun a thumbs up >he returns the gesture, shows us to slow down, they speed off Cool cops
Ian Gonzalez
This is probably my favourite thing about this bike. When i finish the build, this is staying.
with a hacksaw and a TIG welder
Daniel Scott
>motherfuckers still going with SEM crew >I'm here >having to work every day >hate work >hate people i work with >hate my life >can't sleep fo shit
rip harambe
Jayden Martinez
he bought 2? thats like $3000 isn't it?
he could have bought a custom fit helmet for that kind of money.
Jeremiah Cooper
by the way, that screw isn't just acting as a lever, its part of the valve. I had to drill a hole through it and get it lined up for the fuel to flow. What a stupid design
Austin Ortiz
Ye One for him and one to gift me or sis >it's safe >muh technology
Leo Cruz
dealership here has an H2 and H2R sitting on the show room floor.
after kawasaki made a 2016 model i think they lost their rare factor so people dont care about them now.
Gavin Gonzalez
post more shit bikes
John Roberts
>tfw my bike came stock with steel braided lines Still need to swap to brembo monobloc calipers and 320mm discs sometime.
Bentley Adams
Some shitter is spamming new /dbt/ threads
Cameron Green
my bike came with the brembo M50s and they make so much fucking noise.
Oliver Watson
The stock nissin 6pots on the 310mms make a good bit of grindy noise at low speeds but once you hit about 5mph the wind noise drowns it out.
Justin Foster
>shivvy came with steel lines and 320s stock >i could fit tuono's brembos >an RSV frontend could fit >tfw no munny
Elijah Baker
im talking about a squealing sound when ever i brake hard. the nissins on my gsxr were silent and i miss it.
Juan Lewis
Ayy dat italian pride >tfw Brembo Monoblocks off the F4R 2010 are literally plug and play on my bike >tfw a bit of shimming would probably be all that's needed for 320mm discs, if that >tfw my engine is the same as the newer ones except for the head >tfw the new heads are literally bolt-on simple, so with new heads, ECU, and injectors I could easily make another 50hp with a bit of tuning Gotta love dat italian cost saving
M8 that sounds like the friction material on your brake pads is ded. I'd check those asap.
Lincoln Ortiz
>tfw ingurgitating high amounts of alcohol to deal with the end of sem
Xavier Davis
well this one has the most replies so this must be the official /dbt/, clearly
Ryder Carter
>tfw ride 02 gixxer with TOKICO calipers >tfw they went out of business
Jonathan Myers
tokico brakes are gone? is that why the new GSXRs all have brembos now?
Joshua Cook
Should've come with us, we still huddle up every night to keep warm
Isaac Myers
Don't remind me, next time you see me making a bad decision I give you my permission to put a bullet in my head
Isaiah Jackson
RIP drobve
Robert Lopez
I want another SEM. Now. And the money to do so. I have to work three hours every day this week, and afterwards I have nothing to do I need to find something I can do now that I don't ride every day anymore because SEM is over and no money
Hunter Collins
Clean your carbs.
Gabriel Howard
>afterwards I have nothing to do Waitress you fuck, get some money on the side so you can come next time to SEM
>look who's talking
Juan Rodriguez
you converted it into an enduro?
Jace Sanders
Does the sport bike riding position ever become more comfortable? Holy fucking shit is it painful right now. I rode an FZ-07 before
Gavin Morales
I did it before the SEM, no need to do it again, it runs perfectly I replaced my choke cables yesterday though
>look who's talking yes exactly I'm starting my thesis next month, I'll be getting enough money there
Charles Sanders
yes, been like that for the last 20 years.
Zachary Reyes
Use your butt and knees Lighten the pressure on your wrists Lower your rearsets Be a manlet
Luke Wright
git gud.
you sit still hunched over a sportbike, you gonna get sore. you climb all over a sportbike, like you should.
Carter Ortiz
Would it be possible to drop an Honda B4 into a beetle?
Daniel Sanchez
I have to say the upright position is a welcome change after the SV650S.
Justin Wilson
>tfw still have quite a lot of money left after SEM Would have had even more if I hadn't stayed in hotels for the last four nights on the way home. I think I'll buy a proper GPS before the next SEM. It was pretty scary how reliant I was on my phone during this trip.
Thomas Nguyen
>an Honda >>>/anHero/
Elijah Clark
I don't see why not, it'll be a lot of work tho. I think I saw a long time ago someone doing something similar with a twingo.
Brody Hernandez
>transmission is enclosed >shaft drive final drive In my head it looks stupid proof My main concern would be torque and short gearing
Parker Cooper
My step dad wants to put a busa engine in his X1-9 one day. Would this ever work?
Nathan Rivera
yeah, i've been worried about that too. gonna either install a simple charging setup like FKG, or save up for a decent dedicated unit.
which mapmakers get all the speed cameras & cop faggotry up to date?
Matthew Edwards
It has been done There's even a v8 made by 2 conjoined busas
Cameron Cox
people have done it with VW beetles but i read many years ago that it takes a lot of work done to the transmission. easier to just do some actual inline 4 car engine.
Eli Cox
Rode for the first time today, was lovely. I know most of ya hate cruisers but I love this thing.
Ryan Miller
fuck I thought you'd be dropbe
Levi Perry
I would put a charger on your bike either way. It's pretty handy to be able to charge your phone/camera/mp3 player while riding.
Austin Hill
Like I said, a ton of work to get it to work correctly. Hey, if you want a difficult project, then dive right in.
William Hill
>Jap cruiser It's alright, m8. You're cool.
Luis Thomas
Not long enough to be a cruiser.
Benjamin Jackson
What the fuck?
Austin Sanders
Take the retarded ass windscreen off and maybe those saddlebags. Looks gay af.
Carter Foster
>Looks gay af.
At least there are no metal studs, that's a major red flag of faggotry for me.
James Sanchez
What kind of work? Minimal nigger rigging i can do, welding and balancing driveshafts not so much
Kevin Bennett
What would happen if I put leaded 110 Octane racing gas in my bike? I was at a gas station the other day and saw a pump for it and just started wondering.
Luke Ramirez
It came like that I'll be taking almost everything off, but those rear bags are super useful.
Gabriel Collins
You'd waste some money.
Parker Green
What is it then? Usefull for what? Your dildo collection?
Adam Ross
>not riding a Honda
Cooper Lewis
My bike says unleaded only and i specifically avoid e-anything Saw a cunt pump diesel in ascooter and drive off like no big deal
Michael Brown
>What is it then?
An embarrassing attempt at looking cool.
Jace Morgan
Yeah, those dildos don't transport themselves ya know?
Joshua Torres
>he needs a 750 lb long ass cruiser to pull his fat ass to Walmart