/dbt/ - Gundam Edition

It's gonna be a cb125

Probably a 500 or 650 desu

How to get sikk wheelie footage when you have no friends?

Opinions on this?

GROM

CCMs are pretty tits, but fucking expensive and really not that useful unless you plan to run the Dakar rally route for funzies.

>CCM

R A R E

Timed shutter.

Don't know if this got an answer last thread, but different dude:
Custom tank-rubber. Covers and kneegrips.
Where is best to cop for a rounded tank? Places that won't complain about copyright waifus?

Google spat these, but I want anecdotal experience.
createyourtankpad.com/en/
immortalgraphix.com/custom-tank-pads-1/
(I try to ride my slow bike fast. Tendies shrink everyday.)

Looks like a motorcycle.

I miss the temporary next door grill that helped me with tinkering a lil while ago

...

Is this a good starter bike? im 6'2 230lb, its a cb500

I've been looking at the Yamaha Bolts, what do you think /dbt/?

i could probably get it under 5k and it only has 300 miles on it

If you are not doing hard core routes you'll look like the biggest fucking poser.

>Parks at Starbucks next to the line of GS's

maybe

It'll work.

Yes

...

How much do you ride that on the road on how long do a set of knobbies last?

No, no comparison.

can clutches seize after being stood for a while?

Needs more meme wheel.

...

Comparable torque and horsepower to equivalent Harley, but with greater depreciation and much smaller aftermarket.

Does being fat help with woolie since I have more weight to pull the bike around?

I am okay with homosexuality, just don't shove it into my face

If it was dry as fuck it could stick. Should be pretty easy to pop it loose.

Worse case, take it apart and re-oil the frictions. ( just throw them in a ziplock with a small quantity of oil or a tray and dip them, make sure the little pads have oil on them ), no need for a long soak time, you can put it back together right away.

Get a big gf instead

I'll crack it open and try that tomorrow
cheers dear

>dat Tuono
user you need to stop posting your bike, my dick can only get so erect.

I doubt they will take the time to check as long as its not a blatant company logo and they are only doing one.

>Tfw no ATwin sumo
Soon...

You can't stop me dammit.

>not getting the GS Rambler

...

>tfw nobike
>tfw nogf

Get a bike, before the missus takes it away again.

Post tire tendies

My bike has no passenger pegs or seat.

Anybody get a new bike lately?

New as in new model or newly purchased?

Newly purchased

Soon. Getting my license in a few weeks, hopefully.

Yes.

This is the closest I got, but still bretty gud in it's own right.

...

Say, user, how old are you and what do you do for a living to be able to afford one of those?

Also, 'a'.

18, surgeon

Are there any decent roads in Georgia? Most of them around my residence are complete shit.

I'm 23 and I'm a sheet metal worker/fabricator/engineer. I part ex'd my old bike against it and got a loan to pay the difference.

This way, the bike's mine from day 1, so if I decide I don't like it or get bored of it (neither of which I can see happening) I can sell it and get something else. Wanted one for ages though, ever since I saw the facelifted '15 shape, such a gorgeous bike.

I like that tuono, user. Good upgrade :)

Thanks my dude.

>18
>surgeon

And I'm the pope.

Why?

>exhaust blowing
would it be fine to epoxy the hole, wrap it in tin foil and jubilee clip it down?
I'm on a budget/lazy

>epoxy
>hot exhaust

Fuck no man. You can get exhaust sealant paste that'll do the job though.

yeah that's what I meant, couldn't think of the name

Then yeah, your ghetto fix should hold for a while, provided it's not a huge hole.

How big is the hole? If it is only a few millimeters, JB Weld that bitch up. Be patient and give it time to set before you run the motor. IIRC epoxy breaks down pretty quickly in high heat.

>mfw Indian
>mfw lurking in these threads looking at these beautiful machines
>mfw I'll never get to ride any of them

2016 KTM 1190r, to go along with my meme wheel I posed up there somewhere.

recommend overpants pls

I recommend overpants

Not with that attitude you won't.

thank you

I don't recommend overpants.

I maybe recommend overpants

2 smokes a beast

Can somebody post the adv GS 500 pic pls?

have adv monster instead

>dbt can't even go half as fast this squid

youtube.com/watch?v=kfBHAGyZ2QI

>tfw gixxers are third world bikes

Is there a reason I should go that fast?

>squiding
>no chin strap
I can't enjoy this video, but how fast does he get on those stretches? 110mph?

i think that's his hoodie laces

Highest I saw was about 150mph

>that wheelie in the tunnel
nervous_sweating.gif

>wheelies

I don't get it, is the Benelli Leoncino out or nah?
Can't find any video reviews. Not planning to get one, just curious about the bike.

leaking oil but I'm not sure where from
it's either the sprocket seal or the gear shifter seal
is that a big job to change?

...

newhaven.craigslist.org/mcy/6168828174.html
Is the clutch fucked on this bike? look at the 5th picture.

my bike came with a bunch of extra parts, and one of them is a sort of half chain guard, that covers the part of the chain next to your foot, but leaves the part over the rear sprocket exposed. So what I'm wondering is what is the downsides of this compared to the full guard?

Been dropped

No such thing as a full guard unless you have an oil bath chain from the 70s

I woundn't touch that bike with a ten foot pole, it is definitely hooped

Yeah whole thing just looks sketchy

It looks like that guy and every one of his friends hooned it and put it away wet.

...

>he can't wheelie
lmaoo

>just get my bike running great two weeks ago
>idles in spec, great power, smooth exhaust note
>two days ago it starts knocking
>I work out of town on Friday
fucking kill me. I started running premium fuel, switched the oil out, and now I've got seafoam. I'm hoping the seafoam cleans it. But the knocking might have blown a gasket. There are burn marks on the cylinder head cover.

Don't buy into the classic bike meme. Just don't.