Does anyone know how to make acid that can melt shit?

1. Eat a protein bar
2. Make self sick
3. Dehydrate sick
?????????????? Profit.

Um, standard laboratory acids include 98% pure H2SO4 which is about as acid as you can get

The most toxic acid is HF because unlike other acids that burn your skin, HF penetrates down to your bone

Also keep in mind that if the idea is to "melt shit" that caustic soda, NaOH is just as corrosive as acid in most cases.

H2O2 + (CH3)2CO + HCl --> H2SO5

Shit nigga, you what?

Agreed, it depends what you want to destroy. Bases like NaOH and oxidizing agents like KHSO5 work very well on organic materials, whereas acids work very well on many minerals or metals. I personally enjoy aqua regia (3:1 HCl to HNO3) because it is particularly good at melting the precious metals gold, silver, palladium, platinum, and ruthenium.

Don't listen to this asshole, that makes chlorine gas.

Go to a beauty supply store and get some higher concentration hydrogen peroxide (used for bleaching hair) and Acetone.
Heat them separately in TEFLON cookware to about 200F. Teflon is supremely nonreactive, the peroxide will turn iron or steel to rust while losing potency, and tarnish the shit out of copper. Dunno about aluminum but wouldn't advise it.
200F. Don't boil. Don't microwave, it's harder to control temp.
Pour the acetone into a pyrex bowl. Slowly add the hydrogen peroxide. If it fizzes a lot just slow down.
Do NOT add the acetone to the peroxide, add the peroxide to the acetone only.
Let it cool to room temperature.
While not technically an acid, the solution will dissolve fucking anything, metal, plastic, rubber, rocks, concrete, asphalt, anything.
So uh. Be careful.

That being said, the strongest acid known, a so-called super acid, is fluoroantimonic acid which I believe is only stored in highly cross-linked PTFE, as it destroys everything else it comes into contact with.

Hey, apparently the Brussels bombers used this stuff, cool!

en.wikipedia.org/wiki/Acetone_peroxide

LOL
Don't do this OP. It makes a dirty bomb
Here's a real powerful acid you can make at home from easily available chemicals. Pour several bottles of store bought iodine tincture into a glass container, then add an equal amount of muriatic acid to the container. Then carefully add bleach (Do this in a well ventilated area! This will fume chlorine gas which is toxic!). Wait until the mixture stops fuming then pour it through a coffee filter. You should have pure iodine in the filter. Fill a beaker with store bought ammonia, then add the iodine. Wait till a precipitate forms on the bottom of the beaker then heat the solution to 200 C. You'll want to use a lot of iodine because the acid deprotonates the cations during heating. Wait for the excess ammonia to boil off, and you should be left with a dark purple/black crystal. Put your hand over the top of the beaker and shake it vigorously, then add a milliliter of distilled water and two grams of peroxide to the beaker and you've got an acid that will eat through anything. Remember to use a lot of iodine.

>The most toxic acid
you mean reactive

If it can dissolve EVERYTHING, how can it be stored and transported? I mean for real. You can't store it because it melts its way through?

Just curious because this quesiton just appeared

Google Alkahest if you are interested.

Dali paintings are good.

It's just that your "feeling" concept cause is too gay for the human art.

use the traditional methods use lime
don't forget to wash your hands and NOT dry them before spreading the lime on the shit. Water will protect you from the dryness of the lime

youtube.com/watch?v=cLpSapjKcxM

can't you just flush it

Don't do this.
It'll go all Fight Club on you.

>Do NOT add the acetone to the peroxide, add the peroxide to the acetone only.

What's the difference, does this imply a difference in volume required?

Just mix fluorosulfuric acid and antimony pentafluoride.

It's also called "Magic acid".

is not acid old submarines had petroleum-buck

yeah that thing, with peroxide and acetone creates acetoneperoxide if i am not wrong wich is highly reactive and explodes very easily.
but used in many labs to clean the hardest shit:
use highly concentrated H2O2 w = 50% with an equal amount of concentrated H2SO4 w > 90%.
this creates Peroxomonosulfuric acid. its a strong oxidizer but very reactive with organic substances, creating organic peroxides! thay explode very easily. so don't mix it with acetone (same product as before) or something like that.

ow someone postet the video of this.
didnt saw.

Acid does not "melt", you cretin.

Then what does it do?

It dissolves, or to be more precise, shifts the chemical balance towards the fluid phase.

Trips has spoken; either outline or post pic of mech

verb, melted, melted or molten, melting.
1.
to become liquefied by warmth or heat, as ice, snow, butter, or metal.
2.
to become liquid; dissolve

Nice nitpicking assburger

"melt" explicitly refers to the phase shift between solid and fluid

Autism

No.
Insisting on accurate language when required is common sense.

It is not required in this context.

It is, because acid does not melt.

sulfuric acid will melt that shit right up,why do you feel the urge to melt your own shit though?

This.

You store the components used to make that acid separately, then combine them on-site.

>Peroxomonosulfuric acid.
this is the shit

once had to resublimate ferrocen and that thing was a bitch to clean out

like about 10ml of that and 10minutes - 100% clean

bretty awesome stuff

This is the easiest way

Yeah get some acid and heat it up.