/hg/ 本田

Should I upgrade my exhaust/intake system or my engine first? Want to get the most gains in horsepower but I have no idea where to start

t. Acura Integra LS

Getting those extra hours?

Good luck figuring that out

Am I the only one who got bored of car shows or meets?

No it's just ricers want to hear the engine more

Kinda. Usually getting around 35 a week.

Gotta love that k24 sound

What do you drive?

Engine first

what is that a 1.5?

Talked to my cop friend about my ticket and he suggested that I plea 894. Hope that works. Pic related.

>Tfw kid says "nice Civic" and gives a gud tip

Based.

>Got cut off again from somebody about to run a stop sign

This shit is getting ridiculous.

I had to make an emergency right turn the other day from a ford fusion rolling through a stop sign, nearly nailed her right in the spot she was nailed form a previous stop sign crash.

I don't get a lot of asshole drivers like you guys in my area. Everyone just drives fast though. Like 10mph over the speed limit.

You aren't driving here in CA if you're not speeding, I got pulled over for doing 60mph on a spare tire in the #2 lane while trying to merge onto another freeway.

He let me go cause I would've fought that shit.

damn nihga

It looks like this now, I've never really done DIY bodywork, but it looks like it's shape even though the light and cover a little misaligned.

Won a car wash kit in a raffle at a meet and met the founder of MN Cars and Coffee. Guy used to have an 84 lewd and nostalgia'd over the CRX keychain.

Are you gonna use it on both the X and Z?
I need to get my shits washed

Both soon, just gotta have the X detailed to remove some of the white clumps and black specs. Still deciding on which service to use. Would recommend wash mits and reusable microfiber towels.

Also, Focus done up in FnF rice parked next to me at a meet.

I know that's a ZX3 but this still applies.

youtube.com/watch?v=L26kTJjgIG4

Based nigga couldn't resist a free CM.

youtube.com/watch?v=u5g4xLr1pgI

They need to do this in Chicago desu

Clover was giving me shit so I couldn't reply earlier.

I gotta be vigilant at all times because it's been happening so much. No regrets putting most of my money into suspension mods. They have saved my ass a few times. Can take hard ass turns with no understeer.

After like 20 days of waiting, I finally got my center caps from Thailand. I had no idea they were brand new. Been out of production since the 90's so this is fucking awesome.

They fit much better than the old set. No chance of me losing them on the toe gay.

car is dying
very sad

...

those are nice as fuck, are the screws just for looks or do they help hold them on?

Just for looks but the real ones helped secure it to the wheel. These lock in real tight, though. I'll have to take the wheel off first if I wanna pop them off.

Hit the NOS

What's wrong with it

Hit the NOS

the NOS, hit

Hit the NOS.

Ayo hit dat nos mang

Looking for a new project idea

Any suggestions?

HIT THE NOS

How rare are cf48s?

HIT THE NOS

you know the non vtec b20 of the crv
can you imagine what its like with vtec like an integra?

B20/b16 ef has been a goal for a long while

Changed my ma's wheels back to summers.

fuck

You may not like it, but this is what peak performance looks like.

OEM silver 5 spoke >>>>>>> black with machine metal 5 (x2) spoke

rear discs are ok still

I can't tell whats worse: the white out turn signals or the fact he changed lanes and then signaled

stay the fuck out of my lane im faster than you

I SAID STAY THE FUCK OUT OF MY LANE REEEE

had a b20 longblock for a while and was considering doing a b20v, but decided i wanted to go turbo instead

but i love me some torque

This is a growing problem in my neighbourhood.

K swap civic

Kek good luck finding a set.

Yea the oem ones look better

Do you live near a major city? Usually it's major cities with shitty drivers

Git gud and try not to end up behind a bus

you can get them for less than a set of volks

not rare

toronto ontario
its towrongto onterrible
took my dads route down cosburn, i take oconnor which has higher speed limit and close to no buses. i hate having him as my co driver/passenger

Youll be paying out the ass for a set in good condition with all the extras
But if youre up for restoring them yourself you can get them cheap

Tfw can't find a cl type s 2003 6 speed to engine & tranny swap my 6th gen accord.

Do they even make swap kits for those?

From what I researched converting my 4 speed AT
j30a2 accord into a 6 speed MT j30a2 would be the same mounting points, I'd need to custom order a harness (bottom left) though from some guy at the v6p / accord forums. Seams like a lot of hassle so I might end up not doing it at all since it's only for ~65ish more whp. A shame for this car is my car that I learned how to drive.

What can I do to squeeze more out of a B18C2 while staying NA?

my.mixtape.moe/vpfgbw.webm same webm with audio.

j30a1*** (There is no j30a2)

honda-tech.com/forums/all-motor-naturally-aspirated-44/b18c2-build-2749854/

I'm thinking about selling my second gen Fit Sport and getting a Golf.

Just got an AC leak test and recharge. Was on empty and now it's good to go. Gotta change the cabin filter some time.

>tfw USPS coming on a Sunday

Based as fuck. Just wish I ordered the extension earlier and I could get it all done today. At least I'll have my radiator cap.

Glad to have the center caps back. Looks so much better.

Were they stolen?

They were pretty loose fitting and one fell off during some hard driving. These are wayyy tighter and brand new too. Out of production too.

>not ep3

You probably have a leak somewhere

That's some good shipping

Race cars don't use them since they melt off

It's probably hard to find a structurally sound EP3 if it snows in certain areas, unlike CA where unriced EP3 is possible.

Yep gonna probably install it tonight. Just picked up my friend's old wrapped eBay header so I won't need that O2 extension harness.

Suck though I still overheated with the new radiator cap but the hoses weren't trying to burst like with the old cap. Really hope it's just air in the system since I was using a hollowed out cap. I think it was sucking in air through the empty coolant bottle. When I got it home hot, I noticed the empty bottle filled back up so I guess the air was expanding? The coolant was still looking clean. pls no head gasket

I seem to be the only D series fag to have heat issues. My buddy has no idea why.

As I went to go pick up the header he told me he heard like five gunshots like 100 feet from his apartment complex. They blocked off this intersection which is usually pretty busy. Don't think anybody was shot but I think they had it blocked off to collect evidence.

Don't think it's ever been recharged. '03 that sat for 6 years.

We shiny now.

that color is so nice, do you protect it with waxes? i hear those paints are pretty delicate especially to the sun

Only hybrid worth driving/10.

Take good care of it. They're not so sought after now, but I bet in like 20-25 years it'll be adored for its obscurity

are you sure user-kun?

Shit i might not be.

Just applied the yellow stuff, plus the glass cleaner, wheel wash and armor all. I ran out of micro fiber towels to wax it properly today, but I have most of what I need to wax it. Might get a clay bar too.
Bretty fun car for the money with good torque at low end. Would recommend 2013 and newer for the lithium-ion battery.
I just hope the battery holds up for a long time. The cool part about mine is that the VIN ends in a 7, so maybe it's super early production.

nice, looks like you take care of it. However armor all products are shit desu, it seems like you need a sealant to protect your nice paint from the sun and contaminants. Get this stuff when you can it's really good
>amazon.com/Meguiars-G13616-Interior-Detailer-Cleaner/dp/B000AMLWH8/ref=sr_1_1?ie=UTF8&qid=1494208800&sr=8-1&keywords=meguiars interior detailer

interior cleaner, no shiny ugly greasy look and feel. nice brand new smooth clean feeling with no shine.

>amazon.com/Chemical-Guys-WAC-118-16-Anti-Corrosion-Protectant/dp/B001TFE38A/ref=sr_1_1?ie=UTF8&qid=1494208785&sr=8-1&keywords=jet seal

this stuff protects your paint for months, just reapply by pad every 3-6 months

Went D3 because highway merge but didn't expect it to shift into 2nd
webmshare.com/JG96J

He almost hit the paramedics

I admit, I anal clenched when he did this.

Thanks user, I won it in a raffle yesterday. It'll be used more once the CRX gets detailed to remove the black specs and white clumps. I'm gonna order this stuff tomorrow morning.

What kind of stuff safely removes old wax?

Plate matches the color pretty well

>entering_the_wangan.webm
Drunk?
You had plenty of space on the right m8

>What kind of stuff safely removes old wax?
for the old crx you speak of? start with a thorough wash,claybar,compound,polish,sealant. assuming it's clearcoat isn't toast

I'm ready to die.

>bleed coolant with the coolant funnel
>let it sit for a while
>never even gets close to 200-210 when the fan kicks on
>sweet
>close it all up and go pick my sister up from her friend's place
>sit in the long ass McD drive thru
>never overheats
>sweet
>pull into the parking lot at home
>temp starts to get too high
>park and shut it off
>coolant overflow was filled to the top

I'm ready to give up.

i know i had the space its just that ive never had someone swing right on the left turn lane before. hope i dont clench next time, im tired of being a greenie

kek, reading this kinda reminded me of this
>youtu.be/fYp9opLWz5o

That's air bro

kek

I honestly don't know what to do next.

How long is bleeding supposed to take? It seems like its taking air in on its own and forcing the coolant out. It's not making the coolant dirty like when the head gasket went out. It's staying pretty clean. Here's what the bubbles were looking like. I turned the heat on shortly after and every second or so a big bubble came up.

youtu.be/gpr36NpDQjk

Hit the NOS

...

>shingu has been bleeding his coolant for like 6 months

>it literally takes 5-10 minutes from empty to filled and bled