The people's car of Veeky Forums - the continuing

I think I see a van in the black/dark version every time I look the thumbnail of pic related.

Most notably for the small thumbnail in the catalog

1.8l I4 Twin cam w/ 5 speed MT for top JP trim
2.7l V6 SOHC w/ 6 speed MT for top US trim

Bonus points if V6 makes less power than I4, and it's the only vehicle with the 6 speed.

Sticker for local student radio station

This car has a pretty long front-end, so a straight 6 is more likely the engine for this.

A quad rotor turbo rotary would fit nicely as well.

What about a v12?

Lets go nuts and put in a straight 8.

You still need to put the mirrors far further forwards. They need to be somewhere between the center of the wheels and the frontmost edge of the rim. And maybe make them black plastic.

This

I might have to pirate a copy of automation to get some engine statistics.

They had a free version, but they deleted it because they hate joy and happiness.
>open demo version
>update
>get excited for updated demo
>stops working

>S13 styled headlights
Son, I am not disappoint. you did your father proud.

New bonnet and separate low-beams. This could either be a part of a different trim level or a face lift.

pls put S U P E R T U R B O on the doors.

Mirena like the original version is a face-lift then, or this looks like a basic trim version.

It's a 80's car, so I personally suggest a turbocharged V6, make the son of a bitch a sleeper ;)

I've already started work on the engine bay.

A turbocharged V6 fits in there nicely...Hell I think a In-6 fits in there without much problem.

Engine looks great! Is it the F20Z2?

This front could be used for the aerodynamic version, which will have rear wheel covers ;3

In order for this front end to be more aerodynamic, you need to make it thinner, not just disguise it as thinner.

I don't think you understand, it just has to appeal to the eco conscious buyer who doesn't really care.

Pretty sure the full width strip lowbeams would be more aerodynamic.

What program/programs do you guys use?
It's pretty cool!

It's blender. I swear, in the next thread I will have to make that obvious from the start, so I don't get this question every thread.

Still think you just make the twingo fr and have an ls running a jdm ashtray

So.. I tried to make the base 2l 6cyl. (The idea is to have a low-end and high-end 4cyl and turbo 6 + something stupid like a straight 8)

I made a 2.5l straight 6 with 300KW for about 5k cost

At 9.7k rpm or something stupid N/A btw

New wheels, cuz I really don't like the old ones.

I want realism, plus I was working with 1985 technology.

Drop redline to 6200
What's the compression ratio?

Wait, just noticed peak power.
Widen bore, lower stroke and keep a CR of about 10.2:1
You should be able to hit 7200 redline, and hopefully not lose power.

>newton meters
>not pound feet
I think you should have two six cylinder engines and maybe a V8, or if you can fit one an inline-8. If you like your low displacements, why not make the base 2.2L, the upgrade 2.8L, and the eight around 3.5L.

>livery
Here you go

A real Trueno would have weeb show wheels, you know.

Straight 8s pretty much don't exist at all by this time period, guys. We're looking at a smogged I6. At the longest.

Fuck it, make the AMC 4.2L an option. It'll fit.

give it piston and 13b (or maybe 20b) rotary options like the middle gen cosmos

en.wikipedia.org/wiki/Mazda_Cosmo#Series_HB_.281981.E2.80.931989.29

Struts and strut brace.

This thread is gangster as fuck

>New wheels, cuz I really don't like the old ones.
maybe these should only go on the Blacked version?

I came.

SHITTED

supercharged V4 hybrid matted to a CVT trans

das it mane
and then the base models/lesser trims can get the quirky 2spoker

DO IT

Texturing

I'm thinking a fuckhueg, high-revving inline 5, like 4L revving out to at least 8000, DOHC 4 valve per cyl of course.
120mm bore by 71mm stroke

Damn those are 80s as heck. Keep them

*nuts*

What software is this?

it's in the fucking picture, Automation, it's vidya.

>pound feet
>not newton meters

I WANT IT!

Keep those wheels, they are lovely

Hey what are the trim levels now? From a 2 litre NA six on? Atleast four trims levels? Don't do the straight eight shit that is dumb if you actually want an 80s car. The top spec should be like a 3 or like a 3.5 l straight six tarbo.

Just bought it LMAO looks sick...

No fender mirrors, I am disappoint.

>Poverty spec 4 cyl NA maybe 130-ish BHP
>Eco spec 4 cyl (dunno if NA or tarbo) better tune then normal
>4 cyl Tarbo 165-ish BHP, has sporty bumpers, wheels and spoiler
>base 6cyl just about 200 bhp
>Top tier 6 cyl tarbo with louvers, spoiler, wheels, everything. 270bhp
>WAT edition 8cyl with penis wheels, only special order for special people (autists) :3
Not to mention trims from the EU and US versions.

later

K that sounds good. My idea was like to have straight sixes only, SOHC 2V NA 2.0, DOHC 4V NA 2.0, DOHC 4V NA 2.5, SOHC 2V tarbo 2.5 and the "WAT" edition could be a DOHC 4V tarbo 3.5l

The week-end is in front of us, there is enough time to make decisions on what engines we will use.

aren't these tyres too low profile for this 80s look?

Shit. They are.

1.6 TD
.
6

T
D

It's so teary-eyed, like a newborn baby

At least it doesn't have a sad face. (I'm just doing every shot of the car while I can.)

perhaps make the pop up lights a bit wider and taller?

WAT edition needs side pipes with fake exhaust tips.

no

And does anyone have any better ideas for the tailights?

try the round FC-style, as seen in earlier renders

something like this?

Make it like the turd gen and have orange and red for that extra 80s goodness

Probably not.

That could work, will see next week.

like this style, but behind the 1 piece smokey plastic
maybe even the lit up TURBO brake light, too

nice

ROTARD SERVICE OR BUST!!!!

fug
you should work with the guy making Japan Drift Mania or whatever name he settled on, get this thing in the game somehow

this

On the highest trim level you should have sportier wheels and a WAT emblem on the door like the IROCs. You should also make a power bulge on the hood for the turbo ones.

Can you remove the upper most louvre in the back window? It's kind of breaking the aesthetic, unless that's also meant to be a roof spoiler.

a rotary would be interesting option

it would be a cool feature, maybe have it available with a cheat code

Idk how and how
>I don't know how to contact him
and
>This model (at the time being) is too high poly
But could be arranged in the future.

It's just there because an user requested it.

twitter.com/TOUGE1995

>TURBO decal for the TURBO model
decals on the side is so 80s
do it OP

Thanks.
If you have any ideas for vinyls or even cosmetics, add them/draw them on here.

...

came out looking thin at higher res

Some really subtle stripes as details, like in the pic.

body lines are entirely too high

And related to this maybe like twin cam x valve somewhere written small in the turbo font

pic sorta related

t.