What do you think of my brakes Veeky Forums?

What do you think of my brakes Veeky Forums?

they appear to be missing

those rotors need replacing

Um...

How long was that car sitting?

Looks fine to me op. As long as there's good pad material you're fine

Was driven once a week every week for a year.

You may be right.
Are you certain user.
I was thinking the same, but then again it looks like ass in person. Didn't stop new pads from going on though.

Good use of galvanized wood screws and a paperclip.

>Are you certain user.
yes. the creeping rust on the edge is telling

Looks like you need to your drums

>wood screws holding on the rotors

...

That's the wrong caliper for that size of rotors.

Nvidia makes brake rotors?

I've seen worse

How do you know they're wood screws and not machine screws?

galvanized flat heads are more common on wood screws than machine screws.

>tfw only 3.5 of your 4 brake rotors work properly

Better than mine.

NOICE. I'm surprised there's still friction material on that one pad at all.

not that bad, but that sway bar looks a little whimpy

You can do better than that

And the rotor

Replace the rotors, it's gross to look at rotors coated in rust outside of the swept area of the pads. E-coated rotors are cheap.

Jeez. That groove. I'd definitely replace the rotors after seeing that.

6/10
give it new pads

more like 1.7%

The rotor was almost nonexistent on its inside lip.

Dad borrowed the truck for few weeks, gives it back complaining about brakes locking up. I asked how long it's been occurring and he says it started after the first week.

>tfw he says to bill parts to the business account

I always wonder how people manage to let it get that bad. How long was it screeching like a banshee, smoking like a fire, stinking like hell, and causing the truck to pull to one side and intermittently locking up? Christ.

>How long was it screeching like a banshee, smoking like a fire, stinking like hell,

You dating my ex?

Lmfao!! This guy wins

>You dating my ex?

that right there summarizes this thread. were all leaving our brakes in the hopes that one day they will kill us lul

Man, fuck those screws holding the rotor on, my sister's Mitzu Galant had the same shit. Soaked them all day and still broke them all off and had to drill them out. Didn't bother putting them back after I replaced the rotors.

>sway bar thinner than a sharpie
C'mon user, step it up.