Daily Knife Thread<

Are you sure it was the sayas? Those things are made only of soft magnolia wood, nothing in them could scratch your knife. I have a JCK saya and a Tojiro DP gyuto 240mm too, no problems here. Maybe there was some grit on your knife before you slid it in?

What says, german knifes usually are too heavy and tail heavy for me, global i can use all day in the kitchen and be fine

I've never in my life lost a knife due to the fact that it consisted of more then one piece. My parents Zwilling knives have been worked with (and quite frankly, abused) for nearly 30 years now, most of the time washed in the dishwasher, and they are still a few swipes of the whetstone away from being great.

You are not caring for your material properly if this is more than a gimmick to you.

>as you can see from my mirror finish yoshimitsu tamahagane honkasumi kiritsuke that I bought for $900 and can't be used on a wooden cutting board without having large chunks fall out of the edge at random I would NEVER buy an overpriced global, don't you know their made of pleb vg-10? it's been around since the 1990s, that's for people with more money than sense

If you don't want fancy looking finishes you can get a standard plain looking ZDP-189 for like $300-375.

Holds an edge like a motherfucker, is stainless, and wont chip unless you're going after bone or being overly aggressive with it.

Not everyone spends stupid amounts for good knives.

Didn't Veeky Forums just agree that there were no knives made of ZDP189 and that, if there were, they're not stainless?

They're stainless, that's just a fact, the steel industry officially calls ZDP189 a stainless steel.

And further, i'm not sure exactly what you're talking about, but CKTG has a selection of 5-10 different ZDP189 blades available. most are $500+, but there are two or three under $400. Especially if you just go for a ZDP189 core with a stainless steel cladding and no fancy Damascus finish or similar.

chefknivestogo.com/suzdp189gy21.html

Projecting, the post.

$400 is a stupid amount to spend on a knife unless you live in a bizarro land where you're only allowed to sharpen your cooking knife once every six months and yet your life is on the line if the knife isn't sharp enough to cut onions without crying

$200 will buy a better knife than any reasonable person could ever hope to need

I agree, but the first post was saying $900 is a stupid price for a blade, and I agree. But $350 for basically the highest end knife steel right now in a good profile and decent finish is a good price.

I would NEVER recommend it to a beginner, but it's still an amazing steel and a great blade and if you know how to sharpen it and care for it, will easily outperform that $200 blade, ZDP189 holds its edge much longer than VG10 or Aogami 1/2/Super or Shirogami 1/2/3 or even HAP40.

except when the ZDP only comes in like 3 shapes EVER, whereas there are countless $200 knives for every preference

I'm not saying you need to have every knife in your collection be ZDP189, if you are going to fuck with that sort of steel and you're comfortable taking care of and sharpening that level of steel, you would likely enjoy using a Gyuto, Funayuki, Deba, Santoku, etc in that steel.

The Gyuto is your everyday chef's knife, it makes sense to spend a bit more money on the blade you'll be using most frequently.

no, I'm not saying 3 macro-level shapes (gyuto or deba or whatever)

I'm saying gyutos come in different flavors (more or less belly, more or less spine, etc). people will split hairs over whether this one is more like a push cutter than a slicer than a rock chopper or if it's "sabatier profile" or whatever.

if you're going to put 6 months of edge retention as the #1 priority then you're going to have to live with little to no choice on the actual blade or handle style

My knife for most common tasks. It's 10 bucks and works great.

It's little to no choice in your price range.
Come back with a $2,500 budget and I'll get you a ZDP189 blade of any profile you'd like.

>$2,500 for a knife
so make up your mind, is a $90 global knife overpriced or not?

just picked up a couple different kiwis and they're fucking fantastic. even use them at work because I'm not afraid of coworkers fucking them up compared to my wusthof

I'm not that user, they're fine beaters

See for me personally the Wusthof is my beater that I'll lend out to someone else. My gyuto in Aogami super however is too brittle for me to trust with anyone else.

At least with the Wusthof it's stainless and not as prone to chipping.

I've taken my parents two most dull and abused knives and tried to sharpen them for a while now but I just can't get them sharp, I've been grinding away forever, I'm not expecting it to super sharp but goddamn it still has issues going through paper

>Those things are made only of soft magnolia wood, nothing in them could scratch your knife.
Can we PLEASE let this meme die?

>?I have a JCK saya and a Tojiro DP gyuto 240mm too, no problems here.
Don't lie.

What are you sharpening with?

just FYI "Gyuto" basically means "beef knife" and the fact that you're applying mystical meaning to the term just cuz you can't speak moon runes makes you a fag

just fyi the "english" term "beef" came from a latin root word as a result of french influence, so the fact that you think saying it instead of "cow meat" because you think everything french is fancy makes you a huge homo

oh man i got BTFO

Bought pic related for $5. Best knife I own. It cuts amazingly with little resistance since its so thin. 1/5 metal but 5/5 knife. Kiwi Knife.