Violence is never the answer, but it's an alternative. A very good alternative. Get yourself a fucking hammer and smack that bitch like it owes you.
Help Removing Rotor
Jackson Foster
Jacob Cook
Ahhh i remember this type of shit. My mom had stock brakes form 2001 on her toyota. I just SOAKED the motherfuckers in PBblaster and sad down on the ground and would kick and kick the rotor as hard as i can for 5 mins. Takebm a break, and start kicking again. Took like 20mins but eventually the rotor came off and it felt so satisfying like removing a splinder. By kicking i don't mean with your toe but outward with the BOTTOM of your foot/heel. (Like you're kicking in a door, except your sitting down and using your arms as support.) Also wear booots or really thick shoes
Brody Moore
rubber mallet is a staple of any tool box
Jordan Scott
Better just to use a heavy ass hammer as the boots will yield a bit
Jace Clark
If you have a hammer yes, but in my case i only had a standard sized hammer, so i had to improvise.
Liam Jenkins
So is a gasket scraper, but I wouldn't knock a rotor off with one. A big nylon deadblow might work but brass is the way to go.
Adam Ortiz
Even a normal hammer would be okay, I mean you can get a much better force applied to the rotor with a hammer than a boot.
Anthony Myers
or rubber...
Ayden Flores
a fucking piece of 2x4 wood would work. the point is use something that isnt going to fuck your shit up.
god damn you people are so autistic.
WELL UM ACJTULLY U SHOUD USE BRASS CUZ I WORK ON CAR B4 U CAN USE STEEL IVE DONE IT ASK ME ABOUT WORKIN ON KAR
fucking christ.
Nathaniel Rivera
Wood is good. A normal hammer or rubber hammer won't work well if at all because it will just bounce off the surface. It's not about damaging the rotor.